All WETSTYLE products are manufactured with WETMAR BiO™, an ultra-smooth, non-porous material that helps keep grime and calcium deposits in check.
Le WETMAR BiO™ is ultra-easy to clean: after each use, simply wipe with a soft cloth to remove any surface dirt.
For standard cleaning of both True High Gloss™ and matte finishes, we recommend using widely available cleaning products such as Mr. Clean, Fantastik, CIF, etc.The matte finish may occasionally require a mildly abrasive product.
Never use petroleum-based products when cleaning, i.e. paint thinners or other solvents, as they may damage the WETMAR BiO™ surface. (Note: Personal hygiene products and cosmetics will NOT damage the surface.)
WETMAR BiO™, True High Gloss™
Wipe surface with a soft cloth after each use. Use a mild cleaning product such as Mr. Clean, Fantastik, CIF, etc. Do not use abrasive products or cream cleansers.
WETMAR BiO™, matte finish
Wipe surface with a soft cloth after each use. Use a mild cleaning product such as Mr. Clean, Fantastik, CIF, etc. For more diffi cult stains, use a mildly abrasive cream cleanser such as Soft Scrub, Comet Soft Cleanser, Cream with Bleach or CIF.
Scratched or Damaged Surfaces
To repair scratched or damaged surfaces, sand the area using 600-, 800- and 1200-grit sandpaper: begin with the lower number (coarser) grit followed with each higher number (finer) grit in ascending order. Finish by polishing the surface using a cloth and white polishing compound for automobiles.
For more extensive repairs, send a photograph of your WETSTYLE product to our Customer Service Department ([email protected]), who will inform you as to the most appropriate methods to use.